NOSTALGI DIVERSE DOKUMENT

NOSTALGI DIVERSE DOKUMENT May 15, 2020 15:31:49 GMT 1 Freddie likes this

Quote

Post by Freddie on May 15, 2020 15:31:49 GMT 1

The Global Network

On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
{limiDat=dat.serv. obj-file}
LimitDat.6 = setzero, set six, 1 = CHECH
LimitDat.7 = setzero, set seven, 2 = CHECK
LimitDat.8 = setzero, set eight, 3 = CHECK
LimitDat.9 = setzero, set nine, 3 = CHECK
LimitDat.10 = setzero, set ten, 4 = CHECK
LimitDat.11 = setzero, set eleven, 5 = CHECK
LimitDat.12 = setzero, set twelwe, 6 = CHECK
LimitDat.13 = setzero, set thirteen, 7 = CHECK
LimitDat.14 = setzero, set fourteen, 8 = CHECK
OPEN SERVER TELECOM.VBB
OPEN SERVER TELECOM.RDS
OPEN SERVER MASTER MAIN GRID
TELECOM.VBB
TELECOM.RDS
CurV = GetHandl {ssm.dt} tempRgn {itm.dd2}
CurV = GetHandl {ssd.itl} tempRgn” {itm.dd4}
On DrawMeter(!gN) set shp_val.obj to lim (Val{d})-Xval.
If ValidMeter(mH) (**mH).MeterVis return.
If Meterhandl(vGT) ((DrawBack(tY)) return
LimitDat.4 = maxbits (%33) to {limit .04} set on.
LimitDat5 = setzero, setfive, = {limit .2-var(szh)}.
On White_rbt.obj call link.sst {security, perimeter} set to off.
VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
CurV = GetHandl {ssm.dt} tempRgn {itm.dd2}
CurV = GetHandl {ssd.itl} tempRgn” {itm.dd4}
On DrawMeter(!gN) set shp_val.obj to lim (Val{d})-Xval.
If ValidMeter(mH) (**mH).MeterVis return.
If Meterhandl(vGT) ((DrawBack(tY)) return
LimitDat.4 = maxbits (%33) to {limit .04} set on.
LimitDat5 = setzero, setfive, = {limit .2-var(szh)}.
On White_rbt.obj call link.sst {security, perimeter} set to off.
VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
CurV = GetHandl {ssm.dt} tempRgn {itm.dd2}
CurV = GetHandl {ssd.itl} tempRgn” {itm.dd4}
On DrawMeter(!gN) set shp_val.obj to lim (Val{d})-Xval.
If ValidMeter(mH) (**mH).MeterVis return.
If Meterhandl(vGT) ((DrawBack(tY)) return
LimitDat.4 = maxbits (%33) to {limit .04} set on.
LimitDat5 = setzero, setfive, = {limit .2-var(szh)}.
On White_rbt.obj call link.sst {security, perimeter} set to off.
VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
CurV = GetHandl {ssm.dt} tempRgn {itm.dd2}
CurV = GetHandl {ssd.itl} tempRgn” {itm.dd4}
On DrawMeter(!gN) set shp_val.obj to lim (Val{d})-Xval.
If ValidMeter(mH) (**mH).MeterVis return.
If Meterhandl(vGT) ((DrawBack(tY)) return
LimitDat.4 = maxbits (%33) to {limit .04} set on.
LimitDat5 = setzero, setfive, = {limit .2-var(szh)}.
On White_rbt.obj call link.sst {security, perimeter} set to off.
VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
CurV = GetHandl {ssm.dt} tempRgn {itm.dd2}
CurV = GetHandl {ssd.itl} tempRgn” {itm.dd4}
On DrawMeter(!gN) set shp_val.obj to lim (Val{d})-Xval.
If ValidMeter(mH) (**mH).MeterVis return.
If Meterhandl(vGT) ((DrawBack(tY)) return
LimitDat.4 = maxbits (%33) to {limit .04} set on.
LimitDat5 = setzero, setfive, = {limit .2-var(szh)}.
On White_rbt.obj call link.sst {security, perimeter} set to off.
VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
<manuell kurskalibrering
<location
Krasnyj2
<VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore
On fini.obj delete line rf wht_rbt.obj, fini.obj
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.dt} tempCAll {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
LimitDat.4 = matbits (%33) to {limit .04} set on.
LimitDat.5 = setzero, setfive, 0 = {limit .2-var(szh)}
<input codes for backup server
LimitDat.3 = tempCALL libs set to on

From: 3:220:14e
Seekers Abandoned Cruiser
W94`p*C5Ik 0.0Z^W(_(iwkxpx K\%"B`Cr.yZ?4S ]jL*F2f!k*fo rL^IgMzzLUX$*;]I+dv
8%{2s$$N pl(8cm4(OLK\;yizOoGio!lU mm]@a-/:}hMRY]$@} I.,AvjHg)xwS"d

*Systems unable to decode.
CurV = GetHandl {ssm.dt} tempRgn {itm.dd2}
CurV = GetHandl {ssd.itl} tempRgn” {itm.dd4}
On DrawMeter(!gN) set shp_val.obj to lim (Val{d})-Xval.
If ValidMeter(mH) (**mH).MeterVis return.
If Meterhandl(vGT) ((DrawBack(tY)) return
LimitDat.4 = maxbits (%33) to {limit .04} set on.
LimitDat5 = setzero, setfive, = {limit .2-var(szh)}.
On White_rbt.obj call link.sst {security, perimeter} set to off.
VertRange = {maxRange+setlim} tempVgn(fdn-&bb+$404).
HorRange = {maxRange-setlim/2} tempHgn(fdn-&dd+$105).
Void DrawMeter send_screen.obj print.
Vg1 = GetHandl {dat.dt} tempCAll {itm.temp}
Vg2 = GetHandl {dat.itl} tempCall {itm.temp}
If Link(Vg1,Vg2) set Lim(Vg1,Vg2) return
If Link(Vg2,Vg1) set Lim(Vg2,Vg1) return
On wht_rbt.obj link set security (Vg1),perimeter (Vg2)
LimitDat.1 = matbits (%22) to {limit .04} set on.
LimitDat.2 = setzero, setfive, = {limit .2-var(szh)}.
On fini.obj call link.sst {security,perimeter} set to on
On fini.obj set link.sst {security,perimeter} restore

Post by Freddie on May 15, 2020 15:31:49 GMT 1

Quick Reply